aplica Hidrofugante de Fachadas

aplica Hidrofugante Fachadas is a ready-to-use waterproofing treatment, made with solvent-dissolved siloxanes, for a transparent, invisible protective coating. Use to waterproof surfaces exposed to rainwater: concrete, mortar, brick, tiles, fibre cement, etc., in general any absorbent surfaces of mineral origin. Prevents the accumulation of dirt and spread of fungi and algae.


aplica Hidrofugante de Fachadas
aplica Hidrofugante de Fachadas
Instructions for use

  1. Before applying, ensure that the surface to be treated is dry and free from dust, grease and efflorescence. Any cracks on the surface should be repaired first with a repair mortar of aplicaTec Repair range.
  2. Apply with a brush, roller or spraying machine.
  3. Apply on continuous sections and avoid attempting to apply over scattered areas at once. Two coats are recommended (wet on wet).
Warnings and recommendations
  • Do not apply this product when frost or rain are forecasted.
  • Do not apply at temperatures below 5°C or above 35°C.
  • Use within 1 year of packaging date. Store the product in its original closed packaging in a dry, covered place.
Technical Features

Available Formats

aplica Hidrofugante Fachadas is available in tins of 20 l.

Compressive strenght
  • Mortar: 40 kg / cm2 after 28 days.
  • Mortar + 5% Aplica Latex: 60 kg / cm2 after 28 days.
  • These results were obtained in tests carried out under standard conditions, and may vary as a result of the conditions in the area where the product is applied.
  • Additive to improve the mechanical resistance of traditional cement, plaster or lime-based mortars.
  • Additive to improve the mechanical resistance of finishing and one-coat mortars.
  • Additive to improve the properties of distempers or plastic paints.
  • Adhesive bridge when fresh.
  • Waterproofing mortars.

The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is used. As the application conditions are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.


Declaraciones Medioambientales

Concienciados con el medioambiente