Aplica Primer Top

Ready-to-use adhesion primer, based on silane and quartz resin, with excellent adhesion on porous and non-porous supports. Ideal for interior and exterior applications, prior to the application of all types of cementitious mortars and plasters.

Aplica Primer Top
How to use

  1. The support must be clean, dry, stable, free of oils, greases, paints and loose parts.
  2. The product can be applied with a brush, roller (long hair, hard hair) or gravity gun.
  3. The approximate consumption will be 0.125 – 0.175 kg/l. depending on the roughness and final nature of the support.

Aplica Primer Top will be presented in 5 kg cans, 200 kg pallets (40 units).


Apica Primer Top ensures a rough adhesion surface and a reduction in support absorption allowing correct adhesion on the following supports:
• Tiles
• Cement mortars
• Focused and prefabricated plaster
• Anhydrite
• Plastic
• Brick
• Fiber cement
• Concrete
• Metal
• Natural or artificial stone masonry

The product has the main advantages:
• Excellent adhesion
• Low VOC emissions (Volatile Organic Components)
• Neutral odor
• Quick drying


As an adhesion bridge it can be used on absorbent and non-absorbent supports as well as: Tiles, cement mortars, focused and prefabricated gypsum, anhydrite, plastic, brick, fiber cement, concrete, metal, natural or artificial stone masonry. It allows the bonding as an adhesion layer between plaster and cement renders, as well as the bonding of cement and lime-based plasters, on porous and non-porous supports.


Recommendations for use are based on our knowledge and experience. The technical data has been obtained under normal laboratory conditions, and may vary depending on the conditions of installation. Since the application conditions are not controllable by us, the information in this sheet does not imply the responsibility of the company.


Declaraciones Medioambientales

Concienciados con el medioambiente