APLICAPROMPT

Flash set mortar.

aplica Prompt
APLICAPROMPT
How to use

1. Add five parts of aplica Prompt to one part
of water and mix manually wearing rubber gloves (the speed of the set means that it is impossible to mix mechanically) until you obtain a smooth, lump-free paste. Mix only mortar required to be used.
2. Apply mortar as soon as you have mixed it, as it sets very quickly.
3. When anchoring objects, there should be clearance of at least 1.5 cm between
the hole and the object that is going to be anchored.
Applications

Quick anchoring of frames, trash racks, bathroom fittings, anchor pins, etc.
Placement of drains and sewers.
Placing lintels over doors and windows.
Floor and edge repair.

Presentation

aplica Prompt is available in 25 kg paper sacks with moisture-proof plastic lining, dispatched on shrinkwrapped pallets weighing a total of 1.000 kg (40 sacks).

Note

The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is used. As the application conditions are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.

ECOETIQUETADO

Declaraciones Medioambientales

Concienciados con el medioambiente