aplicaRev Mortero Acrílico

aplicaRev Mortero Acrílico is a waterproofing finish made with a copolymer dispersion with added pigments. High durability.


aplicaRev Mortero Acrílico
Instructions for use

  1. Apply with a trowel or spray gun.
  2. The application surface must be dry, clean and free from any sort of impurity, such as dust, sand, saltpetre, fungus, old or flaky paint, lime, etc.
  3. Mix the product well using an electric stirrer.
  4. Apply on top of a coat of aplicaRev Mortero Acrílico.
  5. Apply ACRYLIC MORTAR in sections using a trowel. Wait between 15 and 30 minutes (depending on weather conditions), then trowel the mortar.
  6. Trowel the mortar using circular movements. Trowel once the surface is reasonably solid.
  7. If applying with a spray gun, up to 1 litre of water can be added.
  8. Apply thicknesses of between 2 and 3 mm.
Warnings and recommendations
  • Do not apply at temperatures below 5ºC or above 30ºC, in direct sunlight or when rain or frost are forecasted.
  • Do not apply on horizontal surfaces or sloped surfaces at an angle of less than 45°.
  • Wash all tools used with plenty of water.
Technical Features

Available features

aplicaRev Mortero Acrílico is available in 25 kg plastic containers.

  • Specially-formulated to protect and decorate façades and indoor walls. For use on materials commonly used in construction.
  • Avoid storing at cold temperatures or in places directly exposed to the sun.
Colour Range


The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is used. As the application conditions are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.


Declaraciones Medioambientales

Concienciados con el medioambiente