aplicaTec Renovación

Renovation adhesive for indoor and outdoor repairs. Made with highly-resistant cement, screened and selected dry aggregate, additives and high performance resins.

Used as an adhesive for polystyrene boards (ETICS – External Thermal Insulation Composite Systems). Permeable to water vapor.

aplicaTec Renovacion
aplicaTec Renovación
Instructions for use
  1. Check that the application surface is suitable and ready for use.

     2. Mix until you obtain a paste of the                 required consistency.

     3. Leave the paste to stand for 2                         minutes  and mix again before                         applying.

     4. Apply a thickness of 4 mm to the                   application surface. For greater                       thicknesses, apply in several layers.

Warnings and recommendations
  • Do not apply onto plaster or painted surfaces.
  • Do not apply this product when frost or rain are forecasted as this may lead to efflorescence.
  • Do not apply at temperatures below 5°C or above 35°C.
  • In joints between different materials or where there is a risk of cracking, reinforce the mortar with a fibreglass net.
  • It is advisable to moisten absorbent or very hot surfaces before applying the product.
  • Do not apply onto waterproofed surfaces.
  • This product is ready to mix with water. Do not add any kind of additional substance which may alter its properties.
  • Use within 1 year of date of packaging. Store the product in its original packaging in a dry, covered place protected from humidity.
Technical Features

Available Formats

aplicaTec Renovation is available in 25 kg paper sacks with moisture-proof plastic lining, dispatched on shrink-wrapped pallets weighing a total of 1,600 kg (64 sacks).

Application Surfaces
  • The surfaces must be stable, resistant, sound, flat and free from grease, oils and paint.
  • Such as cement-based mortars, brickworks, concrete blocks…
  • Indoor and outdoor finishes on brick or concrete blocks, for the installation of mineral wool insulation panels.
  • Apply by hand or using a spray machine.

The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is used. As the application conditions are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.


Declaraciones Medioambientales

Concienciados con el medioambiente