Capa Proyectable TX Autolimpiante

Capa Proyectable TX Autolimpiante is made with photocatalytic white, grey cement, lime, selected aggregates of controlled grain size, inorganic pigments, and additives which improve the product’s workability, adhesive bond, plasticity and waterproof. Specially formulated to be applied by spray machine.

Waterproof rendering mortar with self-cleaning capacity. White, grey or pigmented. For outdoor use. GP CS III W2 and CR CS III W2 in accordance with Standard UNE EN 998-1.

Capa Proyectable TX Autolimpiante
tx
eco
Capa Proyectable TX Autolimpiante
Instructions for use

  1. Apply preferably by using a spray machine.
  2. Use of 4.7-5 liters of clean water by adjusting the relationship until you obtain smooth, lump free-paste of the required consistency.
  3. Spread evenly over the surface with an average thickness of 15 mm.
  4. After 30 minutes approximately (depending on environmental conditions), smooth with a plastic or wood handle grout float.
Warnings and recommendations
  • Do not cover the surface of photocatalytic cement mortars, as it could affect its self-cleaning property.
  • Do not apply onto plaster surfaces.
  • Do not apply this product when frost or rain are forecasted.
  • Do not apply at temperatures below 5 ºC or above 35 ºC.
  • Apply two coats for thicknesses greater than 20 mm, up to a maximum thickness of 30 mm; waiting for the first coat has hardened enough.
  • It is advisable to moisten absorbent or very hot surfaces before applying the product and 24 hours afterwards in order to prevent the mortar from becoming overly dry or less strong.
  • Do not apply onto water repellent surfaces.
  • Use aplicaRev Fix as an adhesive bridge on concrete and on smooth or non porous surfaces.
  • This product is ready to mix with water. Do not add any kind of additional substance which may alter its properties.
  • Use within 1 year of date of packaging. Store the product in its original packaging in a dry, covered place protected from humidity.
Technical Features

Available Formats

Capa Proyectable TX Autolimpiante is available in 25 kg paper sacks with moisture-proof plastic lining, dispatched on shrink-wrapped pallets weighing a total of 1,000 kg (40 sacks).

 
 
Application Surfaces
  • The surfaces must be rough, hard, stable, clean, and free from dust, pain and release agents.
  • Check that the application surface is suitably flat, that there are not disintegrating parts. If required, fix the surface 24 hours beforehand, filling in any holes with the same material.
  • Brickwork, concrete blocks, rough M-7.5 mortar renderings and concrete.
Self-cleaning

Photocatalytic cement work by dissolving or decomposing in the presence of light, the dirt that accumulates on the surface of walls and facades.

Self-Cleaning mortar minimizes waste usually of biological origin, which stain the facades of buildings, public works, etc. maintaining the color and aesthetic values of the initial construction, in addition to providing an extraordinary brilliance and luminosity.

Note

The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is use. As the applications are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.

 
 
ECOETIQUETADO

Declaraciones Medioambientales

Concienciados con el medioambiente