Capacril Flex Imper Fibras

Elastic coating based on styrene-acrylic polymers in aqueous emulsion with glass fiber.

 

Capacril Flex Imper Fibras
Capacril Flex Imper Fibras
Instructions for use

  1. Shake aplicaFill Fibras by manual or mechanical
    means for homogenisation before use.
  2. The application can be done either by wool roller,
    brush or airless spray equipment.
  3. Apply a first coat of product diluted 1:3
    (water:aplicaFill Fibras) to allow penetration into
    all cracks and crevices.
Warnings and recommendations
  • Do not use aplicaFill Fibras in locations where it is in permanent contact with water, either through storage, waterlogging or condensation.
  • aplicaFill Fibras is a finishing product. It is not a coating for frequent passability, but for visitable.
    Do not place any sharp objects onto the product.
  • Surface temperature/application of + 5ºC / 35ºC.
    Do not apply if rain is forecasted in the next few hours.
  • Tools should be washed with clean water immediately after use.
Technical Features

System structure

For applications in vertical surfaces as well as for roofing:

  • 1 priming coat with diluted aplicaFill (1:3) in the case of porous surfaces.
  • aplicaFill coats (a fibreglass mesh can be used in roofing between the two coats, with the first coat still fresh and the second coat with the first coat once dry).
Available Formats

aplicaFill Fibras is available in 5 kg and 20 kg plastic containers. Expiration date of 1 year from the manufacturing date in its original sealed container protected from frost and overexposure to the sun.

 
 
Applications
  • Waterproofing of roofs on many types of supports
    (Catalan floor tiles, roofing tiles, bricks, mortars,
    concrete, fibre cement, polyurethane foam, aluminium,
    wood, zinc…)
  • Vertical faces
  • Protection of dividing walls
  • Canalizations
  • Treatment of meeting points
  • Crack bridging
  • Tile repair
Note

The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is used. As the application conditions are beyond our control, the information provided here does not imply that the company accepts r esponsibility for any variations.

 
 
ECOETIQUETADO

Declaraciones Medioambientales

Concienciados con el medioambiente