Capafina TX Autolimpiante
Made with photocatalytic white, grey cement, lime, selected aggregates of controlled grain size, inorganic pigments, and additives which improve the product’s workability, adhesive bond, plasticity and waterproof. Specially formulated to be applied to a maximum thickness of 5 mm, as a fine-textured façade finishing.
Self-Cleaning cement with additives to be applied as a façade waterproof finishing. White, grey or pigmented. For fine finishing. For outdoor use. GP CS III W1 and CR CS III W1 in accordance with Standard UNE EN 998-1.
Capafina TX Autolimpiante
- Check that the application surface is suitable and ready for use.
- Moisten surfaces before applying the product.
- Use of 4.7-5 liters of clean water in an electric mixer at low rpm until you obtain a smooth, lump-free paste.
- Leave the paste to stand for 2 minutes and mix again before applying.
- Spread over the surface in thickness not exceeding 5 mm.
- Once the mortar has started to harden, smoothed with a plastic or wood trowel.
- Moisten the mortar 24 hours after application. Repeat for 2 to 3 days.
- Do not cover the surface of TX cement mortars, as it could affect its self-cleaning properties.
- Do not apply directly to the enclosure (brick, concrete block, etc.).
- Do not apply onto plaster surfaces.
- Do not apply this product when frost or rain are forecasted.
- Do not apply at temperatures below 5 ºC or above 35 ºC.
- Do not apply onto smooth or non porous water repellent surfaces.
- It is advisable to moisten absorbent or very hot surfaces before applying the product and 24 hours afterwards in order to prevent the mortar from becoming overly dry or less strong.
- Use aplicaRev Fixas an adhesive bridge on concrete and on smooth or non porous surfaces.
- This product is ready to mix with water. Do not add any kind of additional substance which may alter its properties.
- Use within 1 year of date of packaging. Store the product in its original packaging in a dry, covered place protected from humidity.
Capafina TX Autolimpiante is available in 25 kg paper sacks with moisture-proof plastic lining, dispatched on shrink-wrapped pallets weighing a total of 1,000 kg (40 sacks).
Photocatalytic cements work by dissolving or decomposing in the presence of light, the dirt that accumulates on the surface of walls and facades. Self-Cleaning mortar minimizes waste usually of biological origin, which stain the facades of buildings, public works, maintaining the color and aesthetic values of the initial construction, in addition to providing an extraordinary brilliance and luminosity.
The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is use. As the applications are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.