Capamicro CEMENTO

Decorative coating based on GP CSIV W2 category cement

• 1 component, ready to use
• Without primer
• Valid for indoors and outdoors
• No mesh reinforcement
• Consumptiononly 1 kg/mm/m2

Cement-based decorative coating of category GP CSIV W2 for application in exterior and interior masonry and CT-C40-F10-A9 for application on floors, walls, furniture. Creates an excellent aesthetic surface with a velvety finish. It has hydrophobic characteristics, excellent adhesion, high hardness surface and abrasion resistance.

Capamicro CEMENTO

• Velvety appearance and soft touch.
• Mainly designed for decorating walls and floors.
• It can be used to decorate furniture, sinks, bathrooms, etc.
• Excellent for creating effects indoors and outdoors.
• Ideal for commercial and urban uses.
• Offers excellent aesthetic quality.
• It can be applied on any type of surface: wood, MDF, ceramics, plasterboard, plywood, Plexiglas, etc.
• Application in swimming pools after waterproofing.

Main Characteristics

Capamicro Cemento is a finishing coating with very high performance for walls and floor coverings. Its easy application and preparation allow the applicator to guarantee a reliable performance in creating the specific effect regardless of the application technique used. , while its high adherence makes it an integral part of the substrate. Micro-cement layer with velvet is completely waterproof to prevent possible penetration by external factors and be free of stains. Micro-cement layer can be completely waterproofed with acrylic urethane varnish. Capamicro cemento is compatible with polyurethane, epoxy and acrylic resins. These types of protection facilitate cleaning with solvent-free detergents.


20kg drum.


HAZARD STATEMENTS: H318: Causes serious eye damage. H315: Causes skin irritation. H335: May cause respiratory irritation. H317: May cause an allergic skin reaction. PRECAUTIONARY STATEMENTS: P264: Wash hands thoroughly after handling. P280: Wear protective gloves/eye protection/face protection. P304+P340:IF INHALED:Remove person to cool hair and keep comfortable for breathing. P310: Immediately call a POISON CENTER/doctor. P403+P233: Store in a well-ventilated place. Keep container tightly closed. Contains: Portland Cement Contains hexavalent chromium < 2ppm within the material's storage time


The application surface must be dry, well cleaned and any residue removed. Highly porous surfaces such as aerated concrete, drywall, particle board, etc. must be printed first. Check the safety instructions on the package before use.


Declaraciones Medioambientales

Concienciados con el medioambiente