Capaproof PRIMER EP ALL

Water-based epoxy resin primer

• Universal primer for dry substrates
• Improved adhesion of PU-based membranes

CAPAPROOF PRIMER EP ALL is a dual-component water-based epoxy resin. It is specially designed to increase the adhesion of waterproofing systems and improve the flatness of rough substrates such as structural concrete or mortars in applications of waterproofing systems such as CAPAPROOF PUA or CAPAPROOF PU
and CAPAPROOF COAT and CAPAFLOOR floor coatings. It is a non-toxic material with 0% volatile matter.

Capa-Proof-Primer-EP-ALL
Capaproof PRIMER EP ALL
Use

Epoxy resin to be used in the following applications:
• Increase adhesion and improve the flatness of the substrates.
• For application on non-porous substrates such as ceramics, metals, wood, asphalt, PVC or asphalt sheets.
• It can also be applied on porous substrates such as concrete or mortar.
Note: consult our technical department for application on other types of substrates or settings.

Presentation

It is presented in 15 kg and 5 kg metallic container kits.

Expiry

12 months at a temperature of 5 oC to 35 oC, always stored in dry places. If the container is opened it should be used immediately.

Note

The recommendations for use are based on our knowledge and experience. The technical data have been obtained under normal laboratory conditions and may vary depending on the conditions of installation. As the conditions of application are beyond our control, the information in this sheet does not imply any liability on the part of the company.

ECOETIQUETADO

Declaraciones Medioambientales

Concienciados con el medioambiente