aplicaRev Fix

Product made with synthetic resins and mineral loads, designed for use as an adhesive bridge for cement or limestone-based mortars applied onto non-absorbent concrete surface.

Primer to prepare concrete surfaces with no surface absorption for the application of general finishes and mortars.

Aplicarev-Fix-18kg+5kg
aplicaRev Fix
Instructions for use

  1. Before you apply aplicaRev Fix, check that the application surface is firm, free from release agents and suitably flat.
  2. Stir thoroughly.
  3. Apply the product onto the application surface using a brush or roller.
  4. Apply the finish within 3 days.
  5. You can apply the mortar once the product is dry to the ouch.
Warnings and recommendations
  • Do not apply at temperatures below 5°C or above 35°C.
  • Do not apply when frost or rain are forecasted.
  • Avoid applying when direct sunlight is shining on the application surface
Technical Features

Properties
  • No sediment.
  • Quick-dry.
  • Good adhesion between surface and bridge.
  • Water-based, non-flammable.
Available Formats

aplicaRev Fix is available in 18 kg (25 litre) containers and on pallets with 21 containers. Use within 1 year of date of packaging. Store the product in its original sealed packaging in a dry, covered place protected from humidity. If the container has been stored for a period of 12 months, check the product to ensure that it is still suitable for use.

 
Application Surfaces
  • For use on indoor and outdoor walls and ceilings. Concrete surfaces with no surface absorption, which must be dry, sound and clean, free from dust, traces of paint, release agents, surface grout or any foreign agent which may prevent good
    adhesion. Can be applied on architectural concrete façades and concrete walls in industrial warehouses. Repair previousy concrete surfaces by using products of aplicaTec range, if necessary.
Note

The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is used. As the application conditions are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.

 
 

DOCUMENTATION

Download technical data sheet

Download Material safety data sheet
ECOETIQUETADO

Declaraciones Medioambientales

Concienciados con el medioambiente

Saber más