• Outdoor and indoor floor coverings where high mechanical and chemical resistance is required, such as shops, warehouses, car parks and service garages, laundries, petrol stations, etc.
Surfaces require proper preparation and priming prior to application of AplicaFLOOR PUA COLD FAST TRACK.

Metallic containers in kits (A+B) of 5 kg.

• Minimal downtime: dries sufficiently to allow recoating in 2 hours, facilitating complete application of the flooring system in 8 hours (primer and two coats).
• Rapid response: fully ready to use within 24 hours.
• Unaffected by sunlight and adverse weather conditions
.
• Unparalleled coverage: A single coat after priming is sufficient, provided the substrate is smooth and properly prepared.
• Also applicable when low temperatures prevail.
• Excellent resistance to abrasion and mechanical stress.
• High chemical resistance (to diluted acids, alkalis, automotive oils, petroleum, etc.)

• CE certification according to ΕΝ 1504-2.
• Certificate Of Compliance No. 1922-CPR-0386.
• ComplieswiththeV.O.C.contentrequirementsaccordingto EU Directive 2004/42/CE.

Recommendations for use are based on our knowledge and experience. The technical data has been obtained under normal laboratory conditions, and may vary depending on the conditions of installation. Since the application conditions are not controllable by us, the information in this sheet does not imply the responsibility of the company.