1. Stir well before use.
2. Add water and mix well.
3. If using the product with paint, mix directly with the paint.
4. If using as a primer, dilute 1 part with 4 parts water (consumption = 100 g/m²).
5. If repairing mortars – floor mortars, masonry mortars-, dilute 1 part with 3 parts water before mixing with the mortar (consumption = 1 kg for every 25 kg of mortar).

• Do not apply this product when frost or rain are forecasted.
• Do not apply at temperatures below 5°C or above 35°C.
• Use within 1 year of packaging date. Store the product in its original closed packaging in a dry, covered place.

aplica Látex Multiusos is available in boxes containing 10 containers of 1 l. and boxes containing 4 containers of 5 l.

• Mortar: 40 kg / cm2 after 28 days.
• Mortar + 5% Aplica Latex: 60 kg / cm2 after 28 days.
• These results were obtained in tests carried out under standard conditions, and may vary as a result of the conditions in the area where the product is applied.

• Additive to improve the mechanical resistance and adhesion of traditional cement, plaster or lime-based mortars.
• Additive to improve the mechanical resistance and adhesion of finishing and one-coat mortars.
• Additive to improve the properties of distempers or plastic paints.
• Adhesive bridge when fresh.
• Waterproofing mortars.

The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is used. As the application conditions are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.