AplicaPROOF PRIMER EP ALL

Water Based Epoxy Resin Primer

• Universal primer for dry supports
• Improves the adhesion of PU base membranes

ApplyPROOF PRIMER EP ALL, it is a 2-component water-based epoxy resin. It is specially designed to increase the adhesion of waterproofing systems, improve the planimetry of rough supports such as structural concrete or mortars in applications of waterproofing systems such as AplicaPROOF PUA or AplicaPROOF PU, and pavement coating AplicaPROOF COAT and AplicaPROOF. It is a non-toxic material with 0% volatile matter

AplicaPROOF-Primer-EP-ALL
AplicaPROOF PRIMER EP ALL
Applications

Epoxy resin to be used in the following uses:
• Increase adhesion and improve the planimetry of the supports.
• To apply on non-porous supports such as ceramics, metals, wood, asphalt, PVC or asphalt sheets.
• It can also be applied to porous supports such as concrete or mortar.

Presentation

It comes in a kit of 15 kg and 5 kg metal containers.

Expiration

12 months at a temperature of 5 oC to 35 oC, always located in dry places. If the container is opened it should be used immediately.

Note

Recommendations for use are based on our knowledge and experience. The technical data has been obtained under normal laboratory conditions, and may vary depending on the conditions of installation. Since the application conditions are not controllable by us, the information in this sheet does not imply the responsibility of the company.

ECOETIQUETADO

Declaraciones Medioambientales

Concienciados con el medioambiente