Cold-applied elastomeric polyurea waterproofing coating for long-term protection of various surfaces

• Polyaspartic polyurea with high traffic resistance
• Applicablewith trowel or roller
• High resistance to UV radiation
• Suitable for roof application

Dual-component, brush-applied, elastomeric polyaspartic polyurea with excellent resistance to early rain, ideal for long-term protection of various surfaces. It forms a blister-free, moisture-impermeable film with high resistance to UV radiation and mechanical stress. Suitable for waterproofing roofs.


• Concrete roofs, hydraulic tiles, cementitious screeds.
• Roofs where extremely high resistance to standing water is required.
• Metallics* surfaces.
• Directly over new or old liquid waterproofing membranes. • On mineral bituminous membranes.
• On PVC and TPO single-ply membranes.
• Unexposed surfaces (e.g. under tiles).
• Subway exterior walls.
• Water tanks (non-potable water).
• PU foam insulation protection.
The above surfaces require proper preparation and priming prior to the application of CAPAPROOF PUA COLD R.


Metallic containers in kits (A+B) of 19 kg.

Certificates and test reports

• CE certification according to EN 1504-2
• Certificate of Compliance No. 1922-CPR-0386.
• Complies with V.O.C. content requirements according to E.U. Directive 2004/42/EC

Properties and advantages

• Very high mechanical properties: ideal solution for weight-bearing roofs.
• High resistance to UV radiation.
• Exceptional resistance to water absorption: unique resistance to standing water.
• Excellent adhesion on various substrates.
• Remains elastic over a wide temperature range from -35 °C to +80°C.
• Blister-free final surface.
• Resistant to early rain within 1 hour of application.
• Excellent crack bridging properties.
• Apply by roller or airless paint gun.
• Long useful life.
• Compatible with other polyurea coatings.
• Ultra-long service life assured.


The recommendations for use are based on our knowledge and experience. The technical data have been obtained under normal laboratory conditions and may vary depending on the conditions of installation. As the conditions of application are beyond our control, the information in this sheet does not imply any liability on the part of the company.


Declaraciones Medioambientales

Concienciados con el medioambiente