Coatings, covers and waterproofing. Bridges, stadiums, airports and railways. Walkways, balconies and swimming pools. Protection and finishing of wood. Protection of external insulation. Lining of metal and concrete tanks. Waterproofing of floors and parking lots. AplicaPROOF PUA H BASIC has the CE marking according to the product standard EN 1504-2: 2004 - Products and systems for the protection and repair of concrete structures. The material is CE marked according to the 2+ certification system with reference to the use of physical resistance.

Environmentally friendly - contains no VOCs Does not generate secondary reaction products.
Resistant to atmospheric agents.
Low permeability values.
Application at temperatures between -15°C and +70°C.

The two components must be stored in a cool place away from direct sunlight, perfectly sealed in their original packaging and at a temperature between +5ºC and +30ºC. The shelf life of the components is 12 months, when stored in the original packaging, unopened and undamaged. Avoid contact with skin and mucous membranes. Wear protective equipment, especially goggles and gloves. Do not inhale any vapors from product processing and ventilate work areas. For more information, follow the MSDS.

Recommendations for use are based on our knowledge and experience. The technical data has been obtained under normal laboratory conditions, and may vary depending on the conditions of installation. Since the application conditions are not controllable by us, the information in this sheet does not imply the responsibility of the company.