aplicaRev Cal Estuco

Non-hydraulic lime mortar, for a smooth, matt or shiny finish.

Rainwater-proof. Perfect for restoring or renovating old and indoor façades. Apply by hand.

aplicaRev Cal Estuco
eco
aplicaRev Cal Estuco
Instructions for use

  1. Check that the application surface is suitable and ready for use.
  2. Add water gradually until you obtain a smooth, lumpfree paste of the required consistency.
  3. Matt Finish: Ensure that the application surface is trowelled and dry to the touch, then apply the mortar to a thickness of less than 1 mm. Smooth the surface with a trowel several times.
  4. Shiny Finish: Ensure that the application surface is trowelled and dry to the touch, then apply the mortar to a thickness of less than 1 mm. Smooth with a trowel repeatedly until the mortar has a shiny texture.
Warnings and recommendations
  • Do not apply onto plaster or painted surfaces.
  • Do not apply this product when frost or rain are forecasted as this may lead to efflorescence.
  • Do not apply at temperatures below 5°C or above 35°C.
  • It is advisable to moisten absorbent or very hot surfaces before applying the product in order to prevent the mortar from becoming overly dry or less strong. Do not apply onto waterproofed surfaces.
  • As with all lime and/or cement products, there may be some slight colour variations.
  • Light colours should be used to avoid any colour variations.
  • Use within 1 year of date of packaging. Store the product in its original packaging in a dry, covered place protected from humidity.
Technical Features

Available Formats

aplicaRev Cal estuco is available ready-to-use in 15 kg sacks and 3 kg bags.

 
Application Surfaces
  • Old lime surfaces which are strong and in good condition.
  • The ideal application surface is aplicaRev Lime Rendering MORTAR with a trowelled or smooth finish.
Applications
  • Lime rendering mortar for the decoration of façades and indoor walls. Impermeable and offering different finishes: smooth matt or smooth shiny.
 
Colour Range

Note

The recommendations for use are based on our own knowledge and experience. The technical data provided have been obtained under normal laboratory conditions, and may therefore vary according to the environmental conditions in the place where the product is used. As the application conditions are beyond our control, the information provided here does not imply that the company accepts responsibility for any variations.

 
 
ECOETIQUETADO

Declaraciones Medioambientales

Concienciados con el medioambiente