AplicaPROOF PUA P BASIC
Pure polyurea membrane.
• Pure polyurea, high performance
Pure polyurea membrane, according to PDA regulations, with two fast-curing components for the application of elastic membranes that bridge cracks, which is applied only by mechanical spraying.
AplicaPROOF PUA P BASIC
AplicaPROOF PUA P BASIC has been specially designed for the waterproofing of concrete structures, and the protection and waterproofing of polyurethane foams and non-potable water tanks. Likewise, it is indicated for the creation of “in situ application liners, totally continuous for secondary containment, ponds, landfills, tunnels, canals, recovery of dams, tanks, wastewater facilities, etc.
Fire resistance test B2 (DIN 4102-1:1998), flammability test when subjected to the direct action of flame.
The AplicaPROOF PUA P BASIC system must be applied at a minimum temperature of 5ºC. It is recommended to adjust the chemicals to the optimal temperature and agitate the resin component before applying to ensure a homogeneous color and both the specified reactivity and viscosity during the process.
Recommendations for use are based on our knowledge and experience. The technical data has been obtained under normal laboratory conditions, and may vary depending on the conditions of installation. Since the application conditions are not controllable by us, the information in this sheet does not imply the responsibility of the company.